Bermuda 5000 Pressure Filter
Bermuda 5000 Pond Pressure Filter
The Bermuda Pressure Filter 5000 has a compact design that combines mechanical and biological filtration with an in-built 9 Watt Ultra Violet Clarifier for crystal clear water
A 'Free' Bermuda Pond Thermometer will be supplied with each filter ordered
Supplied with UV lighting, which prevents the growth of algae and eradicates harmful micro-organisms and some parasites which may cause fish diseases. They are designed to be continuously run by your pond pump to maintain excellent water quality for healthy water for your fish
The beauty of using this pressure filter is that it can be located anywhere in your garden and can even be buried to be out of sight. These make ideal filters for small goldfish ponds or even larger koi ponds and ensure excellent results. With these filters being under pressure they can even feed waterfalls that are at a higher level and don't rely on a gravity feed back to the pond
Being a pressurised unit, water can be pumped uphill out of the unit to feed water courses or return to the pond while the filter remains hidden unlike a gravity box filter
Pond size: 8000 lts (No Fish) 4000 lts (With Fish) Not suitable for Koi
A rubberised electrical cable is fitted, please note the cable is not fitted with a plug as this contravenes UK electrical regulations, and to be connected to a power supply through a residual current device (RCD)
{Features}
Features:
Mechanical & Biological Filtration
Easy to install
Compact design
Pressurised unit can be placed in or above ground
Built-In 9 watt Ultra Violet Clarifier
For ponds up to 5,000 litres (1,100 gallons)
Recommended pump 3500 lph/770 gph
UV Power - 9 watts
Inlet & Outlet stepped hosetails: 15mm, 20mm & 25mm
Dimensions 376 x 311 x 393mm
Instruction manual supplied
{Technical}
Technical:
Model: 5000
Code: BER0103
Maximum Pond Volume: 5000 litres / 1,100 gallons
Recommended Pump: 3,500lph / 770gph
UV Light: G23 9W
Cable Length: 1.5mts
{How To Clean}
How To Clean:
Turn off the pump and remove the filter head
Remove the foams and clean manually in a bucket of pond water (not tap water), you will then need to assemble the filter back together
Remove the blanking cap from the sludge outlet and put this on the filters outlet, this stops any dirty water from entering back into the pond
Turn the dial to clean and then turn on the pond pump, once the water comes out of the sludge outlet clean you will need to then turn off the pump
Put the blanking cap back over the sludge outlet, turn the dial back to clean and simply turn back on your pump
{Availability}
Ex Stock for next working day delivery