ATI Phosphate Stop AL
{Description}
ATI AL Aluminium Based Phosphate Absorber
ATI Phosphate Stop AL is a high efficiency aluminium based phosphate absorber
Due to its open pore structure it out performs similar products, Phosphate Stop AL can bind up to 80.000 mg PO4/kg. and binds various organic compounds and pollutants (eg. humic acids) silicon and some heavy metals
In the first 24hrs of use ATI Phosphate Stop AL will remove heavy metals before releasing them again so for effective heavy metal removal ATI Phosphate Stop AL should be removed after the 24hrs of use and discarded
With regular ATI Phosphate Stop AL use Activated Carbon may not be required
Recommended use of between 25g and 50g of Phosphate Stop AL per 100 litres water but as every aquarium is different you should monitor po4 levels closely to determine what is best for your aquarium
{Directions for use}
Directions for use:
Rinse well before use, until water runs clear using clean RO water
ATI Phosphate Stop AL should be used with as little movement as possible, a light tumble only is required
If used aggressively it may raise (although not harmful) Aluminium levels in the aquarium, this can be counteracted by using normal ATI Phosphate Stop which will absorb the aluminium whilst lowering phosphates
As with any filter media it should be agitated enough every few days to prevent tracking
We recommend the use of ATI Phosphate Stop AL and ATI Phosphate Stop alternately to counteract the advantages of each product to keep your PO4 levels low
If removing from a high PO4 level ATI Phosphate Stop AL should be used, rather than ATI Phosphate Stop
{Availability}
Ex Stock for next working day delivery