Aquaforest Reef Salt 25kg Box

{Description}
Aquaforest Reef Salt 25kg Box

Fully synthetic marine salt created for aquacultured corals. This formula is designed to create the best conditions for marine animals. The micro-nutrients and macro-nutrients in Aquaforest Reef Salt fulfill corals’ demand for proper growth and pigmentation. After dissolving the salt, your freshly prepared marine water can be used immediately

The salt mix is enriched with amino acids and Vitamin C. The addition of Vitamin C encourages growth and has positive effects on the overall health of all aquarium inhabitants

Supplied in a 25kg refill box

Designed for aquariums with more demanding SPS and LPS corals. It does not contain bromides and can be used with filtration assisted by ozone. It does not contain any probiotic bacteria or growth media. Phosphate and nitrate free. Upon filling new marine tanks it is recommended to let animals in not earlier than after 10-14 days. For salinity of 34PSU (1.025 S.G) dissolve about 3.95 kg (8.71 lbs) of salt in 100 litres (22 US gal.) of water
{Salt Parameters}
Parameters of Aquaforest Reef Salt are:

Cl – 19000 – 19500 mg/l
Na – 10500 – 10600 mg/l
Mg – 1320 – 1350 mg/l
S – 840 -890 mg/l
Ca – 410 – 430 mg/l
K – 380 – 390 mg/l
Br – 17-21 mg/l
F – 1,2 – 1,3 mg/l
Fe – 0,08 – 0,09 mg/l
Sr – 7 – 9 mg/l
dKH – 7,4 – 8,0
pH – 7,8 – 8,2
{Instructions for use}
Instructions for use:

Dissolve the salt in previously prepared demineralised water. Water temperature should be about 24°C (75°F). For salinity of 33 ppt dissolve about 390 g (13.75 oz)/10 l (2.7 US gal) of water. Stir the solution vigorously for about 15 min. When the salt is fully dissolved and the solution clear the saline water is ready to use. Keep the salt in a dry and dark place. Once dissolved, use the salt within 5 days. Keep out of reach of children. Product for aquarium use only. Not suitable for human consumption. Safety data sheet available on request

{How Aquaforest salt is tested}
How is Aquaforest salt is tested:

Aquaforest mix their sea salt (each batch weighing 1 ton - 2204 pounds), they take 3 separate samples from each batch at the production stage for testing. Each of these samples is dissolved in 15 liters (4 US gal) RO water. The Aquaforest team performs ICP-OES analysis to check whether the chemical composition is homogeneous and to exclude the presence of undesirable impurities. Note: Even if you mix the salt thoroughly, the composition of the packaging / containers may not be identical. Parameters in containers may vary slightly, and a difference of 2-3% is acceptable. These differences arise due to the different physical properties of the mix and the limitations of the available processing techniques. Deviations in measurements are, however, less than the typical tolerance range for tests commonly used by hobbyists
{Availability}
In stock for next working day delivery