Osmotics PC-100 Conductivity Controller

Price: £198.26 (inc VAT)

Qty:

Please note that the PC-100 Conductivity Controller has been discontinued and replaced by the PSC-150. NOTE: The features and specifications below are for the PC-100. They will remain on the site for a few months for those customers who wish to compare the PC-100 with the PSC-150.
The PC-100 has been discontinued. It has been replaced by the PSC-150.
FEATURES
Monitors and controls conductivity levels for high output commercial systems.
Large, bright L.E.D. display.
An alarm will sound if the EC level rises above the user-set level.
Installs easily in minutes.
Includes one sensor (at no extra cost).
Protective cover also available (sold separately)
SPECIFICATIONS
Range: 0 - 999 µS/cm (micro-siemens)
Accuracy: ±2%
Resolution: 1 µS
ATC: Yes (1 - 65 degrees Celsius)
Calibration: Adjustable
Setting: Controlled by on-screen up/down buttons
Relay Control: The unit will open or close a circuit via dry contacts when the µS level reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device.
Relay Voltage: 5V
Alarm: Optional steady beep (set by user)
Display: Bright 5/8" L.E.D. display
Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable
Power supply: AC 110V / AC 220V
Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
Monitor Weight: 476 g (1 lb .8 oz)
Total Weight: 680.4 g (1 lb 8 oz)

Osmotics PS-100 Panel Mount TDS Controller

Price: £129.40 (inc VAT)

Qty:

Install the Panel Mount Controller to constantly monitor TDS levels of water produced by a high-output system.
FEATURES
Monitors and controls TDS levels for high output commercial systems.
Large, bright L.E.D. display.
An alarm will sound if the TDS level rises above the user-set level.
Installs easily in minutes.
Includes one sensor probe (at no extra cost).
Protective cover also available (sold separately)

SPECIFICATIONS
Range: 0 - 999ppm
Accuracy: ±2%
Conversion Factor: NaCl (avg. 0.5)
Resolution: 1 PPM
ATC: Yes (1 - 65 degrees Celsius)
Calibration: Adjustable (manual)
Setting: Controlled by on-screen up/down buttons
Relay Control: The unit will open or close a circuit via dry contacts when the ppm level reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device.
Relay Voltage: 5V
Alarm: Optional steady beep (set by user)
Display: Bright 5/8" L.E.D. display
Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable
Power supply: AC 110V / AC 220V
Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
Monitor Weight: 476 g (1 lb .8 oz)
Total Weight: 680.4 g (1 lb 8 oz)

Osmotics Dual TDS Controller PS-200

Price: £155.48 (inc VAT)

Qty:

Install the Dual TDS Controller to constantly monitor TDS levels of water produced by a high-output system. Immediately know if the TDS levels rise above an acceptable level.
FEATURES
Monitors and controls TDS levels of two water lines (e.g., feed water and product water) for high output commercial systems.
Large, bright L.E.D. display.
An alarm will sound if the TDS level rises above the user-set level for the output water.
Installs easily in minutes.
Includes two sensor probes (at no extra cost).
The PS-200 is a monitor for Line 1 (in-line) and a controller for Line 2 (out-line).
Protective cover also available (sold separately)
SPECIFICATIONS
Range: 0 - 999ppm
Accuracy: ±2%
Conversion Factor: NaCl (avg. 0.5)
Resolution: 1 PPM
ATC: Yes (1 - 65 degrees Celsius)
Calibration: Adjustable
Setting: Controlled by on-screen up/down buttons
Relay Control: The unit will open or close a circuit via dry contacts when the ppm level (out line/line 2 only)reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. (In line/Line 1 does not have a control function)
Relay Voltage: 5V (simple switch)
Alarm: Optional steady beep for Out line/Line 2 (set by user)
Display: Bright 5/8" L.E.D. display
2 Probes: 1/2" bushing, 3 meter (9.8 ft) shielded cable
Power supply: AC 110V / AC 220V
Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
Monitor Weight: 476 g (1 lb .8 oz)
Total Weight: 822.1 g (1 lb 13 oz)

Osmotics PS-202 Dual Display TDS Controller

Price: £182.60 (inc VAT)

Qty:

The PS-202 allows for continuous and simultaneous monitoring and control of TDS levels on two water lines.
FEATURES
Simultaneously monitors and controls the TDS levels of two water lines (e.g., the feed water and product water) for high output commercial systems.
Large, bright L.E.D. displays.
An alarm will sound if the TDS level rises above the user-set level for both lines.
Installs easily in minutes.
Includes two 1/2" sensor probes (at no extra cost).
SPECIFICATIONS
Range: 0 - 999ppm
Accuracy: ±2%
Conversion Factor: NaCl (avg. 0.5)
Resolution: 1 PPM
ATC: Yes (1 - 65 degrees Celsius)
Calibration: Adjustable
Setting: Controlled by on-screen up/down buttons
Relay Control: The unit will open or close a circuit via dry contacts when the ppm level of the output water (line 2) or input water (line 1) reaches or exceeds its control setting (simple switch). The PS-202 can be used to control one or two pumps, solenoid valves or other device.
Relay Voltage: 5V
Alarm: Steady beep for both lines
Display: Bright 5/8" L.E.D. dual displays
2 Probes: 1/2" bushing, 3 meter (9.8 ft) shielded cable
Power supply: AC 110V / AC 220V
Dimensions: 9.4 x 9.4 x 12.5 cm (3.7 x 3.7 x 4.9 in.)
Monitor Weight: 569.8 g (1 lb 4.1 oz)
Total Weight: 938.4 g (2 lbs 1.1 oz)

Osmotics PSC-150 Extended Range EC/TDS Controller

Price: £177.40 (inc VAT)

Qty:

New controller includes extended range, digital calibration, on-screen temperature and tri-color display.
FEATURES
Monitors and controls TDS levels for high output commercial systems.
Large, bright L.E.D. display.
An alarm will sound if the TDS level rises above the user-set level.
On-screen temperature display (C/F).
Installs easily in minutes.
Includes one sensor probe (at no extra cost).
Protective cover also available (sold separately)

SPECIFICATIONS
EC Range: 0-9999 µS
TDS Range: 0 - 5000 ppm
Temperature Range: 1-75°C; 33-167 °F
Accuracy: ±2%
Conversion Factor: NaCl (avg. 0.5)
Resolution: 0.1 µS/ppm (0-999); 1 µS/ppm (1000-9999)
ATC: Yes (1 - 65°C)
Calibration: Adjustable (manual)
Setting: Controlled by on-screen up/down buttons
Relay Control: The unit will open or close a circuit via dry contacts when the ppm/µS level reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device.
Relay Voltage: 5V
Alarm: Optional steady beep (set by user)
Display: Bright 5/8" L.E.D. display
Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable
Power supply: AC 110V / AC 220V
Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
Monitor Weight: 476 g (1 lb .8 oz)
Total Weight: 680.4 g (1 lb 8 oz)