Arcadia 30w LED High Powered Spotlight
The Eco-Aqua 30w LED Spotlight is a new high performance LED light source that replicates the lit effect of metal halide lamps with a closely packed cluster of high-power LEDs and a range of interchangeable lenses.
The spotlight uses a die cast aluminium housing with a unique finned design to eliminate the need for cooling fans and can be clamped to the side of the aquarium, or suspended over the tank with an optional suspension kit.
Available in four LED colour combinations, the Eco-Aqua spotlight can be used for both marine and freshwater aquariums and is suitable for use as the primary light source.
The spotlight uses a die cast aluminium housing with a unique finned design to eliminate the need for cooling fans and can be clamped to the side of the aquarium, or suspended over the tank with an optional suspension kit.
Available in four LED colour combinations, the Eco-Aqua spotlight can be used for both marine and freshwater aquariums and is suitable for use as the primary light source.
Features
• Passive cooling without the need for fans
• Long life span
• Waterproof (IP67) LED light unit
• Low energy consumption
• Adjustable position and angle over aquarium
• Interchangeable lenses available
• For use with Marine and Freshwater Aquariums
• Marine White and Freshwater models use a mix of white and coloured CREE XPE LEDs for optimum aquatic colour rendition maximum light output
• Unique low-profile design passive heatsink with large surface area for optimum cooling without the need for fans
• Mounting arm and bracket allow easy fitting to aquarium rim and adjustment of spotlight angle
• Range of additional mounting and lens accessories
• Low voltage IP67 lamp with remote mains driver and power switch
Lens and Spacing Recommendations
• For freshwater planted aquariums the 120 degree lens supplied is recommended unless the unit is suspended 20cm or more above the aquarium. Spacing between LEDs recommended at 40cm.
• For Marine aquariums with soft coral use the 40 degree lens when suspended or with deeper aquariums, the 60 degree lens for nano tanks and when mounted closer to the water surface. Spacing between LEDs is recommended at 35cm.
• For Marine aquariums with hard corals use the 40 degree lens for deeper aquariums and space at 30cm. For tanks 55cm in height or less, use 60 degree lenses at 30cm spacings. It is possible to keep hard corals using the soft coral recommendations of 60 degree lens and 35cm spacing’s, but species with a high light requirement should then be kept directly under the centre of the spotlight.
Each Spotlight is supplied with the following lens angle, type of LED and mix of 12 LED'S.
• E1AA0144M
Marine White. 30w 40° CREE XPE x 8 White 8000K, x 4 Blue 450nm
• E1AA0144B
Marine Blue. 30w 120° CREE XPE x 6 Blue 450nm, x 6 Blue 460nm
• E1AA0144W
White. 30w 120° CREE XPG x 12 White 6500K
• E1AA0144F
Freshwater. 30w 120° CREE XPE x 8 White 6500K, x 2 Blue 460nm, x 2 Red 620nm
• Passive cooling without the need for fans
• Long life span
• Waterproof (IP67) LED light unit
• Low energy consumption
• Adjustable position and angle over aquarium
• Interchangeable lenses available
• For use with Marine and Freshwater Aquariums
• Marine White and Freshwater models use a mix of white and coloured CREE XPE LEDs for optimum aquatic colour rendition maximum light output
• Unique low-profile design passive heatsink with large surface area for optimum cooling without the need for fans
• Mounting arm and bracket allow easy fitting to aquarium rim and adjustment of spotlight angle
• Range of additional mounting and lens accessories
• Low voltage IP67 lamp with remote mains driver and power switch
Lens and Spacing Recommendations
• For freshwater planted aquariums the 120 degree lens supplied is recommended unless the unit is suspended 20cm or more above the aquarium. Spacing between LEDs recommended at 40cm.
• For Marine aquariums with soft coral use the 40 degree lens when suspended or with deeper aquariums, the 60 degree lens for nano tanks and when mounted closer to the water surface. Spacing between LEDs is recommended at 35cm.
• For Marine aquariums with hard corals use the 40 degree lens for deeper aquariums and space at 30cm. For tanks 55cm in height or less, use 60 degree lenses at 30cm spacings. It is possible to keep hard corals using the soft coral recommendations of 60 degree lens and 35cm spacing’s, but species with a high light requirement should then be kept directly under the centre of the spotlight.
Each Spotlight is supplied with the following lens angle, type of LED and mix of 12 LED'S.
• E1AA0144M
Marine White. 30w 40° CREE XPE x 8 White 8000K, x 4 Blue 450nm
• E1AA0144B
Marine Blue. 30w 120° CREE XPE x 6 Blue 450nm, x 6 Blue 460nm
• E1AA0144W
White. 30w 120° CREE XPG x 12 White 6500K
• E1AA0144F
Freshwater. 30w 120° CREE XPE x 8 White 6500K, x 2 Blue 460nm, x 2 Red 620nm
Spotlight Dimensions
 400.jpg)
A range of differently angled lenses are available.
E001 E002 E003
E001 E002 E003
Bridge Beam for mounting multiple LED Spotlights.
Length 1200mm but can be cut down in size.
E1DN0144N
Length 1200mm but can be cut down in size.
E1DN0144N
For suspending a pair of 30w Spotlights from the ceiling.
APENWIRESET
APENWIRESET
